Views: 0 Author: DOBO New Energy Publish Time: 2026-11-18 Origin: Site
Across global flexible PVC manufacturing, regulatory tightening on ortho-phthalates has shifted procurement toward non-phthalate primary plasticizers. Two chemical structures dominate this transition: DOTP (dioctyl terephthalate, CAS 6422-86-2) and DINCH (1,2-cyclohexanedicarboxylic acid diisononyl ester, CAS 166412-78-8). While both are ortho-phthalate-free and widely specified in REACH- and RoHS-regulated supply chains, they differ in chemical backbone, solvating speed, viscosity and low-temperature performance. Understanding where each grade excels helps PVC compounders avoid over-engineering or processing bottlenecks.
DOTP is a terephthalate diester with an aromatic ring in the para position, whereas DINCH is a hydrogenated alicyclic diester with a saturated cyclohexane ring. The table below summarizes the key chemical and physical indicators buyers evaluate before trial compounding.
| Parameter | DOTP (Dioctyl Terephthalate) | DINCH (Cyclohexane Diester) |
| CAS Number | 6422-86-2 | 166412-78-8 |
| EINECS Number | 229-176-9 | 431-890-2 |
| Molecular Formula | C24H38O4 | C26H48O4 |
| Chemical Class | Terephthalate ester (phthalate-free) | Alicyclic cyclohexane dicarboxylate (phthalate-free) |
| Typical Purity | ≥99.0% | ≥99.5% |
| Appearance | Colorless, transparent oily liquid | Colorless, clear anhydrous liquid |
| Viscosity & Solvation | Moderate viscosity; balanced dry-blend absorption | Lower viscosity in plastisols; slower gelation rate |
| Low-Temperature Flexibility | Good cold flexibility (superior to DOP) | Very strong cold-crack resistance and low migration |
DOTP is the workhorse general-purpose non-phthalate plasticizer. Because its plasticizing efficiency and dry-blend absorption behavior closely mirror DOP and DINP, most extrusion and calendering lines can transition to DOTP with minimal changes to temperature profiles or stabilizer packages.
DINCH was developed specifically for sensitive human-contact applications where ultra-low migration into lipid media and strict toxicological margins are required.
When switching from traditional ortho-phthalates to DOTP or DINCH, compounders should verify three processing variables during lab and pilot trials:
Yes. Blending DOTP and DINCH is a common industrial practice to balance fusion speed, plastisol viscosity and low-temperature flexibility while maintaining a 100% ortho-phthalate-free formulation.
Yes. Neither DOTP (CAS 6422-86-2) nor DINCH (CAS 166412-78-8) is listed on the EU REACH SVHC candidate list, and both comply with RoHS Directive (EU) 2015/863 restrictions on regulated phthalates (DEHP, BBP, DBP, DIBP).
Request the Technical Data Sheet (TDS), the batch-specific Certificate of Analysis (COA), the Safety Data Sheet (SDS), and third-party RoHS/REACH test reports matching the grade.
Choosing between DOTP and DINCH comes down to end-use exposure and processing method: DOTP offers balanced efficiency across calendering, extrusion and general medical/toy PVC, while DINCH provides lower plastisol viscosity and lower lipid extraction for specialized medical, food-contact and toy formulations. Contact NINGBO DONGBO NEW ENERGY CO., LTD. (DOBO) to request current TDS/COA documentation and evaluation samples for your PVC line.